3M Easy Trap Duster – 60 sheets (12.70cm x 9.14m roll)
$40.41
3M’s Easy Trap Duster is a highly effective duster that traps up to 8 times more dirt, dust and sand than a conventional flat fringed cotton dust mop and a professional version of a common household sweeping dust cloth brand. Is exceptionally efficient and can double your coverage by fully loading both sides of the sheet. It is uniquely versatile as it will glide through debris, damp floors and even puddles, with ease.
| Unit | 1 x 12.70cm x 9.14m roll |
|---|---|
| Brand | 3M Scotch-Brite |
Warning: Trying to access array offset on value of type bool in /home/elitecl1/public_html/wp-content/plugins/advanced-custom-fields-pro/includes/api/api-template.php on line 499
Related products
3M Scotchgard Stone Floor Protector, 3.8L Bag (2pack)
3M's Scotchgard Stone Floor Protector is a high performance floor surface hardener and protective clear coat for concrete, marble, terrazzo, and other porous stone surfaces. It hardens and seals concrete, marble, terrazzo and other porous stone surfaces. Easy to repair or recoat; no stripping required. When scratches occur on surface, surface can be repaired by burnishing with Scotch-Brite Diamond Floor Pad Plus. Produces a glossy, very hard, dust repellent, chemical-resistant and watertight surface. Extended reach. Ability to withstand high temperatures. Dishwasher safe. Multiple pad options, positions and applications.
Equinox Top Coat – 20L
Pioneer Equinox - UHS floor coating is a high solids formula for ultra high speed applications. Equinox produces a coating so tough that it significantly reduces the frequency of re-coating and burnishing. Provides excellent gloss, scuff resistance and long lasting durability.
RECOMMENDED FLOOR SURFACES - Vinyl composition tile ("VCT"), terrazzo, marble, concrete, quarry tile. Ideal for floors where maintenance occurs 4-7 days per week.
DIRECTIONS FOR USE - INITIAL APPLICATION;
1. Remove old coating and sealer
2. Neutralize floor using a neutral cleaner or EnviroStar Green All Purpose Neutralizer.
3. Rinse floor again with clean, cold water and allow to dry.
4. Apply 4-6 coats of EQUINOX Floor Coating with a clean, synthetic mop. Note - Do not exceed an application of a combined 6 coats of coating and sealer.
5. Allow floor to dry thoroughly between coats and prior to burnishing. Note - To prevent contamination, do not poor unused product from bucket into original container.
DIRECTIONS FOR USE - ROUTINE MAINTENANCE; 1. Sweep floor daily with a dust mop.
2. To clean floor, use mop or scrubber with neutral cleaner.
3. Restore shine as needed with floor maintainer.
4. Burnish as desired with ultra high speed machine and pad.
5. As needed, perform a deep scrub and re-coat applying an additional 1-2 coats of EQUINOX floor coating.
6. Allow floor to dry thoroughly between coats and prior to burnishing.
7. Strip floor when desired results canot be achieved with routine maintenance.
COVERAGE - 61-74m2/L
DRYING TIME - about 30 minutes.
3M A10 Trizact Diamond HX Red
Diamond disc system for intermediate finishing and pre-polishing stone floors using low-speed rotary or automatic equipment. Fast material removal rates. Use on both single and double-sided lapping machines. Cleaner operation; or reduces machine's wear. Reduces slurry clean-up and disposal problems. Minimizes sub-surface damage.
Formula X Stripper – 20L
Pioneer Formula X Ultra High Performance Stripper is a fast acting stripper, powerful, non-ammoniated formula that cuts through heavy build up and hard to remove water based sealers in record time.
DIRECTIONS - Read all directions and Safety Data Sheets (SDS) before using. 1. Mix stripper with cold water per the following dilutions HEAVY costing removal 1:4 (32 US oz per gallon/250 ml per 1 litre of water). NORMAL coating removal 1:6 (21.5 US oz per gallon/166 ml per 1 litre of water); LIGHT coating removal 1:8 (16 US oz per gallon/125 ml per litre of water).
2. Apply solution liberally to the floor and allow to soak for 10 minutes ensuring the solution does not dry.
3. Scrub floor with automatic scrubber or stripping machine. Pick up dirty solution with automatic scrubber or wet vac.
4. Rinse thoroughly with clean water and allow floor to dry completely before applying any finish. Note - Test floor for colour fastness in an inconspicious area.
SURFACES - VCT, Terrazzo, Marble and Quarry Tile.