Pioneer Neutral Cleaner – 20L
$174.90
Pioneer Neutral Cleaner, All Purpose Cleaner, is a daily floor cleaner that removes dirt and soil without harming the shine. Neutral Cleaner is excellent for deep scrubbing and may be used on all washable surfaces.
| Unit | 2 x 10l drums |
|---|---|
| Brand | Pioneer Eclipse |
Warning: Trying to access array offset on value of type bool in /home/elitecl1/public_html/wp-content/plugins/advanced-custom-fields-pro/includes/api/api-template.php on line 499
Related products
Lithofin MN Stain Stop 5L
this special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry. Safe for areas where food is handled – this Lithofin product has been tested according to EU-Ordinance 1935/2004 by an independent institute. The product is considered safe for treating natural and artificial stone surfaces that come into direct contact with food stuffs.
Omniguard 20L – Top Coat
Pioneer Omniguard Ultra High Speed Floor Coating is for high traffic areas that require a durable and easy to maintain surface. OmniGuard is the obvious choice. The high solid formulation of this UHS floor finish produces extreme gloss that withstands the effects of crowded market places in any weather condition.
Lithofin KF Stain Stop 1L
Lithofin KF Stain-Stop (formerly Lithofin FZ Stain-Stop) for initial treatment of new floors with polished and sensitive surfaces. Prevents penetration of water and oil, protects against stains and dirt, and makes maintenance easier. Ready to use. Low on solvents, water based. Does not form any layers. For indoor and outdoor use.
Formula X Stripper – 20L
Pioneer Formula X Ultra High Performance Stripper is a fast acting stripper, powerful, non-ammoniated formula that cuts through heavy build up and hard to remove water based sealers in record time.
DIRECTIONS - Read all directions and Safety Data Sheets (SDS) before using. 1. Mix stripper with cold water per the following dilutions HEAVY costing removal 1:4 (32 US oz per gallon/250 ml per 1 litre of water). NORMAL coating removal 1:6 (21.5 US oz per gallon/166 ml per 1 litre of water); LIGHT coating removal 1:8 (16 US oz per gallon/125 ml per litre of water).
2. Apply solution liberally to the floor and allow to soak for 10 minutes ensuring the solution does not dry.
3. Scrub floor with automatic scrubber or stripping machine. Pick up dirty solution with automatic scrubber or wet vac.
4. Rinse thoroughly with clean water and allow floor to dry completely before applying any finish. Note - Test floor for colour fastness in an inconspicious area.
SURFACES - VCT, Terrazzo, Marble and Quarry Tile.
Equinox Top Coat – 20L
Pioneer Equinox - UHS floor coating is a high solids formula for ultra high speed applications. Equinox produces a coating so tough that it significantly reduces the frequency of re-coating and burnishing. Provides excellent gloss, scuff resistance and long lasting durability.
RECOMMENDED FLOOR SURFACES - Vinyl composition tile ("VCT"), terrazzo, marble, concrete, quarry tile. Ideal for floors where maintenance occurs 4-7 days per week.
DIRECTIONS FOR USE - INITIAL APPLICATION;
1. Remove old coating and sealer
2. Neutralize floor using a neutral cleaner or EnviroStar Green All Purpose Neutralizer.
3. Rinse floor again with clean, cold water and allow to dry.
4. Apply 4-6 coats of EQUINOX Floor Coating with a clean, synthetic mop. Note - Do not exceed an application of a combined 6 coats of coating and sealer.
5. Allow floor to dry thoroughly between coats and prior to burnishing. Note - To prevent contamination, do not poor unused product from bucket into original container.
DIRECTIONS FOR USE - ROUTINE MAINTENANCE; 1. Sweep floor daily with a dust mop.
2. To clean floor, use mop or scrubber with neutral cleaner.
3. Restore shine as needed with floor maintainer.
4. Burnish as desired with ultra high speed machine and pad.
5. As needed, perform a deep scrub and re-coat applying an additional 1-2 coats of EQUINOX floor coating.
6. Allow floor to dry thoroughly between coats and prior to burnishing.
7. Strip floor when desired results canot be achieved with routine maintenance.
COVERAGE - 61-74m2/L
DRYING TIME - about 30 minutes.
