Lithofin MN Power-Clean 5L
$172.70
Lithofin MN Power-Clean for thorough cleaning in case of severe general and greasy dirt, residues of floor care products etc. For regular cleaning of high traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially fo r polished marble and limestone. Concentrate. Highly effective Acid-free, midly alkaline. Free of solvents.
| Unit | 1 x 5 Litre Drum |
|---|---|
| Brand | Lithofin |
Warning: Trying to access array offset on value of type bool in /home/elitecl1/public_html/wp-content/plugins/advanced-custom-fields-pro/includes/api/api-template.php on line 499
Related products
Preserve Neutral Cleaner 5L
Preserve Neutral Cleaner is a natural water-based cleaner formulated for the everyday cleaning maintenance of floors. It can be used by an automatic scrubber. Suitable for any floor not harmed by water, rubber tile, vinyl, terrazzo, concrete, ceramic or quarry tiles. It is formulated for polished floors, and a rinse additive on stripped floors. * Pleasant lemon fragrance * Non corrosive * Grease cutting * Safe on most surfaces. ENVIRONMENTAL ASPECTS: * Phosphate free * Biodegradable surfactants * Safe for food preparation areas and septic tanks when used according to dilution instructions. DIRECTIONS FOR USE - Maintenance: Dilute 1:30 water. Use damp mop to remove excess of solution. Automatic solution: Dilute 1:15 water and place in scrubber solution tank. Stripped floor: Remove old finish, rinse with clean water. Add product in the final rinse at 1:20.
Lithofin KF Stain Stop 5L
Lithofin KF Stain-Stop (formerly Lithofin FZ Stain-Stop) for initial treatment of new floors with polished and sensitive surfaces. Prevents penetration of water and oil, protects against stains and dirt, and makes maintenance easier. Ready to use. Low on solvents, water based. Does not form any layers. For indoor and outdoor use.
Equinox Top Coat – 20L
Pioneer Equinox - UHS floor coating is a high solids formula for ultra high speed applications. Equinox produces a coating so tough that it significantly reduces the frequency of re-coating and burnishing. Provides excellent gloss, scuff resistance and long lasting durability.
RECOMMENDED FLOOR SURFACES - Vinyl composition tile ("VCT"), terrazzo, marble, concrete, quarry tile. Ideal for floors where maintenance occurs 4-7 days per week.
DIRECTIONS FOR USE - INITIAL APPLICATION;
1. Remove old coating and sealer
2. Neutralize floor using a neutral cleaner or EnviroStar Green All Purpose Neutralizer.
3. Rinse floor again with clean, cold water and allow to dry.
4. Apply 4-6 coats of EQUINOX Floor Coating with a clean, synthetic mop. Note - Do not exceed an application of a combined 6 coats of coating and sealer.
5. Allow floor to dry thoroughly between coats and prior to burnishing. Note - To prevent contamination, do not poor unused product from bucket into original container.
DIRECTIONS FOR USE - ROUTINE MAINTENANCE; 1. Sweep floor daily with a dust mop.
2. To clean floor, use mop or scrubber with neutral cleaner.
3. Restore shine as needed with floor maintainer.
4. Burnish as desired with ultra high speed machine and pad.
5. As needed, perform a deep scrub and re-coat applying an additional 1-2 coats of EQUINOX floor coating.
6. Allow floor to dry thoroughly between coats and prior to burnishing.
7. Strip floor when desired results canot be achieved with routine maintenance.
COVERAGE - 61-74m2/L
DRYING TIME - about 30 minutes.
Lithofin MN Stain Stop 1L
this special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry. Safe for areas where food is handled – this Lithofin product has been tested according to EU-Ordinance 1935/2004 by an independent institute. The product is considered safe for treating natural and artificial stone surfaces that come into direct contact with food stuffs.
Lithofin MN Stain Stop 20L
this special impregnator optimally protects absorbent, stain-sensitive natural and engineered stone surfaces against staining. Largely prevents penetration of oil, grease and water and makes further maintenance easier. Highly recommended in kitchen and bathroom. Poses no health concerns once dry. Safe for areas where food is handled – this Lithofin product has been tested according to EU-Ordinance 1935/2004 by an independent institute. The product is considered safe for treating natural and artificial stone surfaces that come into direct contact with food stuffs.
Lithofin ASR Special Cleaner 5L
A special cleaner from the Lithofin line of professional use products. Lithofin ASR is a strongly alkaline heavy duty cleaner, which is formulated on the basis of highly active, biologically degradable cleaning components and solubilisers. The product is free of solvents, and it does not develop any unpleasant or harmful vapours.
Concrete Sealer
This Hi Gloss Concrete Sealer is a solvent based sealer and can be used for sealing concrete surfaces, whether it has been decorated in Stencil, Stamp impression, Pebblecrete finish or just in plain form. The Hi Gloss Sealer offers a hard cleanable coating to plain or coloured concrete surfaces where the surface is subject to light vehicle or heavy pedestrian traffic.