Equinox Top Coat – 20L
$321.20
Pioneer Equinox – UHS floor coating is a high solids formula for ultra high speed applications. Equinox produces a coating so tough that it significantly reduces the frequency of re-coating and burnishing. Provides excellent gloss, scuff resistance and long lasting durability.
RECOMMENDED FLOOR SURFACES – Vinyl composition tile (“VCT”), terrazzo, marble, concrete, quarry tile. Ideal for floors where maintenance occurs 4-7 days per week.
DIRECTIONS FOR USE – INITIAL APPLICATION;
1. Remove old coating and sealer
2. Neutralize floor using a neutral cleaner or EnviroStar Green All Purpose Neutralizer.
3. Rinse floor again with clean, cold water and allow to dry.
4. Apply 4-6 coats of EQUINOX Floor Coating with a clean, synthetic mop. Note – Do not exceed an application of a combined 6 coats of coating and sealer.
5. Allow floor to dry thoroughly between coats and prior to burnishing. Note – To prevent contamination, do not poor unused product from bucket into original container.
DIRECTIONS FOR USE – ROUTINE MAINTENANCE; 1. Sweep floor daily with a dust mop.
2. To clean floor, use mop or scrubber with neutral cleaner.
3. Restore shine as needed with floor maintainer.
4. Burnish as desired with ultra high speed machine and pad.
5. As needed, perform a deep scrub and re-coat applying an additional 1-2 coats of EQUINOX floor coating.
6. Allow floor to dry thoroughly between coats and prior to burnishing.
7. Strip floor when desired results canot be achieved with routine maintenance.
COVERAGE – 61-74m2/L
DRYING TIME – about 30 minutes.
| Unit | 2 x 10l drums |
|---|---|
| Brand | Pioneer Eclipse |
Warning: Trying to access array offset on value of type bool in /home/elitecl1/public_html/wp-content/plugins/advanced-custom-fields-pro/includes/api/api-template.php on line 499
Related products
Lithofin MN Power-Clean 1L
Lithofin MN Power-Clean for thorough cleaning in case of severe general and greasy dirt, residues of floor care products etc. For regular cleaning of high traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially fo r polished marble and limestone. Concentrate. Highly effective Acid-free, midly alkaline. Free of solvents.
3M A10 Trizact Diamond HX Blue
Diamond disc system for intermediate finishing and pre-polishing stone floors using low-speed rotary or automatic equipment. Fast material removal rates. Use on both single and double-sided lapping machines. Cleaner operation; or reduces machine's wear. Reduces slurry clean-up and disposal problems. Minimizes sub-surface damage.
Omniguard 20L – Top Coat
Pioneer Omniguard Ultra High Speed Floor Coating is for high traffic areas that require a durable and easy to maintain surface. OmniGuard is the obvious choice. The high solid formulation of this UHS floor finish produces extreme gloss that withstands the effects of crowded market places in any weather condition.
